-44-
The page includes the following fields:
Object
Description
Disable Wireless LAN
Interface
Check the box to disable the wireless function.
Country
Select your region from the pull-down list.
This field specifies the region where the wireless function of the Router
can be used. It may be illegal to use the wireless function of the Router
in a region other than one of those specified in this field. If your country
or region is not listed, please contact your local government agency for
assistance.
Band
Select the desired mode. Default is “
5GHz (A+N+AC)
”. It is strongly
recommended that you set the band to “
5GHz (A+N+AC)
”, and all of
802.11a, 802.11n, and 802.11ac wireless stations can connect to the
WMC303-1200.
5 GHz (A)
: 802.11a mode, rate is up to 54Mbps
5 GHz (N)
: 802.11n mode, rate is up to 300Mbps
5 GHz (AC)
: 802.11n mode, rate is up to 867Mbps(2T2R)
5 GHz (A+N)
: 802.11a/n mode, rate is up to 300Mbps
5 GHz (N+AC)
: 802.11n/ac mode, rate is up to 300Mbps or
867Mbps
5 GHz (A+N+AC)
: 802.11a/n/ac mode, rate is up to 54Mbps,
300Mbps, or 867Mbps
Mode
There are four kinds of wireless mode selections:
AP
Client
WDS
AP+WDS
If you select WDS or AP+WDS, please click “
WDS Settings
” submenu
for the related configuration. Furthermore, click the “
Multiple AP”
button to enable multiple SSID functions.
SSID
The ID of the wireless network. User can access the wireless network
via its ID only. However, if you switch to Client Mode, this field
becomes the SSID of the AP you want to connect with.
Default:
WMC303 5G
Channel Width
You can select
20MHz
,
40MHz
or
80MHz
.
Control Sideband
You can select
Upper
or
Lower
.
Channel Number
You can select the operating frequency of wireless network.
Broadcast SSID
If you enable “Broadcast SSID”, every wireless station located within
the coverage of the WMC303-1200 can discover its signal easily. If you
are building a public wireless network, enabling this feature is
Summary of Contents for IFS WMC303-1W-1T-1200
