Interlogix ATS1500A-IP-LP, Installation And Programming Manual

Page: 163 / 376

Chapter 5: Menu reference
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 157
2.2.2.n.4.9.4 Total pic cnt
Total pic cnt:
12
The Total picture counter shows how many pictures were stored on the PIR
camera expander flash memory since the beginning of its lifetime.
2.2.2.n.4.11 Delete pics
11 Delete pics
>Cancel<
Choose OK and press Enter to remove all stored pictures from the wireless PIR
camera expander.
Four-door expander specific options
2.2.2.n.4.6 Output modules
6 Outp. modules
>0<
Enter the number of output controllers fitted to the door controller.
Allowed range is 0 to 32. 0 means no clocked output card connected. Note that
there are four open collector outputs available on the door controller for a 4-way
relay card.
2.2.2.n.4.7 Region count limit
7 Reg cnt limit
>65534<
When the number of users reaches this limit, the door controller sets an internal
flag (region count limit) that can be used in the door controller macro logic. You
may activate events when a certain number of users are in a region.
The allowed range is 0 to 65534.
Examples:
• Activate a sign when a car park is full.
• Set areas when the last person has left the region, or unset areas when the
first person enters the region.
2.2.2.n.4.8 Macro Logic
00>Add macro
01 Macro 1
Use the menu to program door controller macros.
For more information on macros, see “Door controller macro logic” on page 70.