Interlogix ATS1500A-IP-LP, Installation And Programming Manual

Page: 317 / 376

Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 311
Appendix A
Advisor Advanced events
For Advisor Advanced system events, see Table 31 below. For access control
events, used to program door controllers, see Table 32 on page 322.
Table 31: Advisor Advanced events
Group Event # Event description Notes
Zone ACTIVE 1 Zone active Zone in active state
TAMPER 2 Zone tamper Zone in tamper state
AM 3 Zone masking Zone in anti-mask alarm state
BATTFAULT 4 Zone battery fault Zone in battery fault state
FAULT 5 Zone fault Zone in fault state
DIRTY 6 Zone dirty Zone in dirty state
SVSHORT 7 Zone supervision
short
Zone in short supervision state
SVLONG 8 Zone supervision
long
Zone in short supervision state
INHIBIT 9 Zone inhibited Zone state changed to inhibited
ISOLATE 10 Zone isolated Zone state changed to isolated
SOAK 11 Zone in soak test Soak test is active
SET 12 Zone set Zone in Part set or Full set mode
ALARM 13 Zone in alarm Zone in alarm. Restores after
alarm acknowledgement.
RF learned 14 Wireless device
programmed
Active for 3 seconds after a
successful programming
RF signal accept 15 Wireless device
found
Active for 3 seconds after device
response
Held Open 16 Zone is open too
long
Zone is held open
Inactive days 17 Zone inverted walk
test failed
Zone has been inactive for
longer than inactive day limit
SHUNT 18 Zone shunted