Interlogix Alliance AL-4017, Installation Manual

Page: 14 / 32

Alliance AL-4017/AL-4617 Control Panel
Installation Manual
4
6. Slide the board’s terminal blocks together as shown in
Figure 3
and mount them to the board.
Figure 3. Terminal block assembly
7. Use four 6/32 x 1/4 in. screws with internal star washers to mount the board (
Figure 4
) in the enclosure
(
Figure 2
on page 3). To ensure proper grounding, tighten screws securely.
Figure 4. Control panel board
8. To comply with FCC Part 15 B, you must install ferrites on each of the AC wires. For mounting
details, refer to the instructions provided with the ferrites.
PSTN connection
E Prom
Flash
Ram
Kill
TX
RX
J18 J20
L1
TST1 TST2
J7 J8
Zone inputs
Power inputs
auxiliary power
outputs, alarms,
and communication
outputs
TX1
RX1
Modem
Comms