Intergraph Zx10 Ultra-Tower, System Manual

Page: 55 / 100

43
Removing and Replacing the Faceplate
WARNING The system is always on when connected to AC power. Before removing the
faceplate, disconnect the system’s power cord from its AC power outlet.
WARNING Replace the faceplate before operating the system. This ensures proper airflow
for cooling.
To remove the faceplate:
1. Open the door and stow it in the base unit. You cannot remove the faceplate if the door is
closed. See Chapter 4, “Operating the System.”
2. Remove both side panels. See “Opening and Closing the Base Unit” in this chapter.
3. Gently pry and release each of the tabs connecting the faceplate to both sides of the chassis.
CAUTION Release the tabs with care. Do not apply more pressure than necessary.
4. Gently pull the faceplate away from the chassis.
Faceplate Tabs (4 each side)