Intergraph Zx10 Ultra-Tower, System Manual

Page: 3 / 100

Safety Notices
This is a user-serviceable system. However, there are no user-serviceable parts in the power supply. Please return the
power supply to the manufacturer for repair.
Service and upgrade tasks should be performed by users who can follow instructions in a manual to service equipment,
and can do so without harm to themselves or damage to the equipment.
The AC power cord for this unit is the service disconnect. Ensure the AC power outlet to which the system’s power
cord connects is close to the system and is easily accessible. For protection against electrical shock and energy
hazards, unplug the system’s power cord from its AC power outlet before opening or servicing the system.
If the AC voltage selection switch on the power supply is not set correctly, serious equipment damage may occur when
power to the system is turned on.
To reduce the risk of electrical shock and energy hazards, do not attempt to open the equipment unless instructed, and
do not use a tool for purposes other than instructed.
Internal components may be at high temperatures. Allow time for them to cool before handling them.
Internal components can be damaged by static electricity. Use an antistatic wrist strap connected to the bare metal of
the system’s chassis to protect against electrostatic discharge.
If a modem card used in the system receives ground from the system, ensure the system is connected to an earth-
grounded AC power outlet.
Notes
Changes or modifications made to the system that are not approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Procedures in this document assume familiarity with the general terminology associated with personal computers, and
with the safety practices and regulatory compliance required for using and modifying electronic equipment.
Read all operating instructions before using this device. Keep these instructions for future reference. Follow all
warnings on the device or in the operating instructions.
To comply with the limits for an FCC Class B computing device, always use shielded cables and the power cord
supplied with the system.