38
Floppy disk drive LED does not light when system power is on
Reason
Solution
Power cable or data cable is not connected.
Open the base unit and ensure the power cable and
data cable are properly connected.
Miscellaneous Hardware
“Battery voltage low” message displays
Reason
Solution
Lithium battery voltage on the system board
is low.
Replace the lithium battery on the system board.
System loses BIOS configuration information
Reason
Solution
Lithium battery voltage on the system board is
low. The system also displays a "battery voltage
low" message during the system boot.
Replace the lithium battery on the system
board.
DMA bus timeout message displays
Reason
Solution
Failure in DMA bus logic has occurred.
Call the Customer Response Center.
“Invalid configuration information for SLOT XX” message displays
Reason
Solution
System is not properly configured to recognize
the new ISA card.
Use BIOS Setup to reserve system resources
for the ISA card. See Chapter 7.
