40
Driver software is routinely improved and updated. Use InterSite Version Manager, or visit
Intergraph Computer Systems on the World Wide Web, to locate and download updated driver
software.
Installing the Operating System
Depending on your system’s configuration, you will need some or all of the following system
software during the installation process:
♦
SCSI controller driver
♦
Graphics controller driver
♦
Audio controller driver
♦
Network controller driver
♦
Mouse driver
To install the operating system software, follow the instructions in Microsoft’s documentation for
your workstation’s operating system. See the following text for information that you may need to
complete operating system Setup.
Do the following during installation of the operating system:
♦
When prompted to select a Setup type, select Custom Setup.
♦
On a system with internal SCSI disk drives and a SCSI controller, press the S key to install the
SCSI controller driver from backup diskette. Select
Other (Requires disk provided
by a hardware manufacturer)
from the list and press
ENTER
. Insert the diskette with
the SCSI controller driver into the floppy disk drive, and then press
ENTER
.
♦
Specify a driver for the CD-ROM drive by pressing the S key and then selecting
IDE CD-ROM
(ATAPI 1.2)/ PCI IDE Controller
from the list.
♦
On single-processor systems, when prompted, select
Standard PC
. This will load the
single-processor kernel and HAL, providing better performance.
On dual-processor systems, if prompted, select
MPS Multiprocessor
. This will load the
multi-processor kernel and HAL, enabling the system to take advantage of the second
processor.
♦
Allow Setup to configure the network only if you have an installed network controller, and
only if the system is connected to the network.
♦
When prompted, create an Emergency Repair Disk.
