51
Parameter
Description
Serial Port2 Mode
Sets the operating mode for serial port 2. This parameter only
appears if the Onboard Serial Port2 option is not set to Disabled.
The Optimal default is Normal.
Onboard Parallel Port
Sets the base I/O port address of the parallel port on the system
board. The Optimal default is 378.
Parallel Port Mode
Sets the parallel port mode. The Optimal default is Normal.
Parallel Port IRQ
Sets the IRQ used by the parallel port. This parameter only
appears if the Onboard Parallel Port parameter is set to 278 or 378.
The Optimal default is 7.
Parallel Port DMA Channel
Sets the DMA channel for the parallel port. The Optimal default is
N/A.
Onboard IDE
Sets the IDE channel used by the on-board IDE controller. The
Optimal and Fail-Safe defaults are Both.
Updating the System BIOS
For information on updating the system’s BIOS, see the
README
.
TXT
file delivered with the
FLASHUTIL2M system software product, which is available from the online services of
Intergraph Computer Systems. See the Preface for information on locating the online services.
