16
2. Disconnect the data and power cables from the disk drives.
3. Remove the two screws that secure the mounting bracket to the right side of the chassis.
See the following figure.
Light pipes
Power
switch
Drive bracket screws
4. Remove the three screws that secure the mounting bracket to the left side of the chassis.
Screws
NOTE
To prevent the mounting bracket from slipping, steady the bracket with a free hand as you
remove the final screw.
5. Pull the mounting bracket out of the chassis.
6. Remove the four screws that secure the old drive to the bracket. See the following
figure.
Summary of Contents for TDZ 2000 GX1
