Intergraph TDZ 2000 GX1, System Reference Manual

Page: 31 / 70

21
Bottom right side
Screws
4. Lift the card guide up to disengage the mounting tabs, pull it backward, and then
remove it from the chassis.
5. Disconnect the fan power cable.
6. Note the airflow direction of the fan.
7. Remove the four screws securing the fan assembly to the front of the chassis and remove
the fan assembly.
8. Remove the two screws securing the the fan to the mounting bracket.
9. Ensure that the airflow direction arrow on the new fan is pointing in the correct
direction, and then secure the fan to the mounting bracket using the two screws you
removed previously.
10. Place the new fan assembly into position within the chassis, and then secure it to the
chassis using the four screws you removed previously.
11. Insert the card guide tabs into the slots and push the card guide down until the tabs
engage.
CAUTION Be sure not to pinch the speaker power cable when installing the card guide.
12. Install the two screws that secure the card guide to the chassis.
13. Connect the fan power cable.
14. Install the expansion cards you removed previously (if any).
15. Install the face panel.
See Chapter 6, “Power Supply and Cooling Fans,” for details on fans.