Intergraph TDZ 2000 GX1, System Reference Manual

Page: 55 / 70

45
EIDE Cable Connection Locations
The following illustration and table show the cable connectors and the locations to which
they attach. This cable is (MCBL121) approximately 10.5 in (26.7 cm) long.
1 3 2
Connector Connects To
1 Secondary EIDE connector, system board
2 Optional device at Location 3 (external bay)
3 EIDE CD-ROM CDSK196 at Location 1
Floppy Cable Connection Locations
The following illustration and table show the cable connectors and the locations to which
they attach. This cable (MCBL106) is standard and is approximately 17 in (43.1 cm) long.
1 2
Connector Connects To
1 Floppy disk drive connector, system board
2 Floppy disk drive
Peripheral Configuration
This section provides illustrations and information on configuring common peripherals for
the system.
See the following for related information:
u
System Board Manual for cable connector locations and pinouts.
u
Chapter 6, “Power Supply and Cooling Fans,” for power cable information and pinouts.