15
Logging Onto a Server
When you open the Server Manager Console, Server Manager checks the local network for
servers that have the LANDesk Server Manager software installed. The servers that Server
Manager finds are listed under the Windows NT group in the Tree pane. You can log onto a
server in the list and display information about it or connect to its EMC.
To log onto a server:
1. In the Tree pane of the Server Manager Console, expand the Local Network group, and
then the Windows NT group.
2. Select the server you want to log onto from the Windows NT group.
3. Key in the username and password. By default, the username is root and the password
is calvin.
Configuring the PC Card Modem
If you want the PC Card modem (the internal modem) to receive incoming calls, you must
configure it to receive out-of band communication.
To configure the PC Card modem to receive incoming calls:
1. In the Tree pane of the Server Manager Console, select the name of the server from the
Windows NT group.
2. If you are not using an account with Administrator privileges, you are prompted for a
username and password. The default username is root, and the default password is
calvin.
3. From the list of items displayed under the server name, expand the Emergency Mgmt.
Card Connection group, and select the Modem group.
4. Click the Tasks tab in the List pane, and select Configure EMC Modem from the
displayed list.
5. Follow the prompts given in the Presentation pane to configure the modem. When
entering the modem information, note the following:
−
Intergraph Computer Systems has found that using the modem at 28800 baud is
unreliable. The recommended baud rate is 38400.
−
The recommended setting for Data Bits is 1.
−
The recommended setting for Parity is None.
−
The recommended setting for Modem String is AT.