6
u
Networking Computer Browser Service running.
u
Mouse with at least two buttons.
Collect Materials and Tools
Collect the following materials and tools:
u
PC Card modem.
u
InterSite Server Monitor software kit.
u
Intel LANDesk Server Manager CD-ROM.
u
InterServe system’s accessories box.
u
Your computer’s documentation.
Installing the PC Card Modem
To use the out-of-band features of the EMC to monitor the InterServe system, you should
install a PC Card modem on the EMC before installing and configuring the ISM software.
To install the PC Card modem on the EMC:
1. Shut down and turn off power to the InterServe system.
2. Locate the supplied PC Card modem, the modem adapter cable, the black EMI snap-on
suppressor, and one tie wrap in the shipping boxes. The modem and modem adapter
cable are shipped in one box; the EMI snap-on suppressor and tie wraps are delivered in
the InterServe system’s accessories box.
3. Record the serial number of the PC Card modem before you install it. You may need
this serial number should your PC Card modem require service.
4. Attach the black EMI snap-on suppressor to the modem adapter cable, adjacent to the
end with the spade connector. Place one of the tie wraps on the cable next to the EMI
snap-on suppressor to secure the suppressor in place. See Figure 4-2 in the Intel
LANDesk Server Manager v3.0 Installation Guide for an illustration showing the correct
setup.
5. Connect the spade connector on the modem adapter cable to the PC Card modem. The
adapter connector is keyed for proper insertion. See Figure 4-2 in the Intel LANDesk
Server Manager v3.0 Installation Guide for an illustration showing the correct setup.