11
Use the following table to copy the correct
HOBBPOST
.
TXT
and
HOBBSRV
.
HDW
file to your
system:
NOTE
When you are prompted about overwriting the existing files, click Yes to overwrite the current
HOBBPOST
.
TXT
and
HOBBSRV
.
HDW
files.
If your system is....
Do this....
An InterServe 635 or
InterServe 645
Copy the
ARG
_
HOBBPOST
.
TXT
file from the Intergraph
SRVMON30 Supplemental diskette to the
windows_directory\
SYSTEM
32
\
DIRVERS
\
HOBBPOST
.
TXT
file on
the server. In addition, copy the
HOBBSRV
.
HDW
file from the
SRVMON30 Supplemental diskette to the
windows_directory\
SYSTEM
32
\
DRIVERS
\
HOBBSRV
.
HDW
file on
the server.
An InterServe 80 or
InterServe 800
Copy the
IS
80
_
HOBBPOST
.
TXT
file from the Intergraph
SRVMON30 Supplemental diskette to the
HOBBPOST
.
TXT
file
on the server. In addition, copy the
IS
80
_
HOBBSRV
.
HDW
file
from the SRVMON30 Supplemental diskette to the
windows_directory\
SYSTEM
32
\
DRIVERS
\
HOBBSRV
.
HDW
file on
the server.
None of the systems
listed above
Copy the
HOBBPOST
.
TXT
and the
HOBBSRV
.
HDW
files on the
Intergraph SRVMON30 Supplemental diskette to the
windows_directory\
SYSTEM
32
\
DRIVERS
directory on the
server.
9. If you are installing ISM on a server with an EMC card, follow the instructions in
“Configuring the Emergency Management Card (EMC)” next. If you are installing ISM
on a monitoring console, restart the computer and skip to “Using Server Manager
Console for Configuration.”
Configuring the Emergency Management Card
(EMC)
Intergraph configures the IRQs, port, and shared memory locations for the EMC before
shipment. If you are reconfiguring the system, or configuring the EMC for the first time, use
the instructions given in the documentation delivered with your Intergraph system to set the
Server Monitor options in the system BIOS.
Once you restart the server after configuring the BIOS options, update the EMC operating
system software and the EMC BIOS, if necessary. To do this, you must use the Server
Manager Console. Read “Using Server Manager Console for Configuration” in this chapter
to learn how to use the interface, and then go on to “Updating the EMC Software and EMC
BIOS.”