8
7. Type the system’s physical location in the Location field (for example, Building 12
Room 101A).
8. Click
Apply.
9. Click Traps (tab).
10. In the Community Name box, type public.
11. Click Add next to the Community Name box to add public to the community names list.
12. Click Add under the Trap Destinations box to add the IP address for public to the Trap
Destinations address list.
13. If you will be installing ISM software on more than one monitoring console, repeat Step
12 for each monitoring console.
14. Click OK to close Microsoft SNMP Properties dialog; then click OK to close the
Network dialog.
15. Click No when prompted to restart the system. You will restart the system after you
install ISM software.
NOTE
You can change the SNMP configuration at any time. To do so, open the Control Panel and
click Network, select SNMP Service from the Services tab list, and click Properties.