I N T E R F AC E M O D E L 9 8 4 0
MO D E L 9 8 4 0 P G 1 0
P U B .
6 0 3 2 - 0 1
RUN MODE
Selecting Run Mode from the Main Menu will bring you to the Run Mode screen depicting
4 displays of channel information. A display is active when it is indicated with a red ring
around it. There is also a red rectangle center of the right screen which corresponds to
the relative position of that display to the other 3 on the left screen. Once a display is
active, the value can be manipulated using various control buttons visible on both
screens. Below is a description of how each of the available buttons operate.
Tare Button
The
Tare
button on the right screen sets the current load or torque to zero for the
channel associated with the currently selected display item. The
Tare All
button
on the left screen will do this for all four channels at once.
Reset Button
The
Reset
button on the right screen resets the current peak and valley for the
channel associated with the currently selected display item. The
Reset All
button
on the left screen will reset the peak and valley for all four channels at once.
Main Menu
The
Main Menu
button allows the user to return to the Main Menu, where the user
can navigate to the Setup menu, the Calibration mode, or back to the Run Mode.
Display Hold/Continue
When the
Hold
button is pressed during Run Mode operation, the readings on the
displays
will hold/freeze. The “Data Streaming” identifier in the top right of the left
screen will go from green to red indicating that the display is not updating its
information in real time. Additionally the
Hold
button will change color from red to
green and will now say
Continue
. Pressing the
Continue
button will unfreeze the
displays and the Data Streaming identifier will switch back to green.
Item Buttons
The
Item
buttons allow navigation through the list of different items that can be
displayed. Not all items are available at the same time. Torque items will substitute
for Load items when appropriate. Sums are only available when cells on all
channels are of the same type (load or torque). Use the
Unit
buttons to change
the units that are used for the currently displayed item.
Unit Buttons
The
Unit
buttons
allow navigation through the list of units that are available for the
item that is currently selected.
