Inter-m MEQ-2000, Operating Manual

Page: 76 / 78

MEQ-2000 24/96 Multimode Equalizer
MEQ-2000 Parameter Identifier for DEBUG
Debug-Character
Byte Data Description
0 01h ID Character for Monitor
1 cc MSB Character MSB
2 Cc LSB Character LSB
MEQ-2000 Parameter Identifier for RTA and Meter Change
The value of a frequency beam is sent only if it has changed. For transfer of beam values,
Polyphonic Aftertouch sysex message is employed as follows:
RTA Change
Byte Data Description
0 0xA0 Polyphonic Aftertouch used for RTA (Running Status supported)
1
2
bb 0 - 30 = RTA Band 0 to 30
100 -105 = Meter (In, Out, Gain reduction for Limiter and Com/Lim)
3 ll RTA Level 0x00 to 0x7F
MEQ-2000 Parameter Identifier for MUTE and BYPASS
For MUTE and BYPASS functions, the Control Change message is employed as follows:
MUTE/BYPASS
Byte Data Description
0 0xB0 Control Change message for MUTE and BYPASS
1 nn Controller number, Bypass = 0x0F, Mute = 0x68
2 vv Controller value, 0x00 = OFF, 0x7F = ON
76