manualshive.com logo in svg

Inter-m DSR-1608, Operation Manual, Page: 9 / 84

Share
Download
Inter-m DSR-1608 Operation Manual Download Page 9

DIGITAL VIDEO RECORDER

9

DSR-815/1608

System Introduction 

System Introduction 

What is a stand-alone DVR?

It signifies an all-in-one DVR in which an independent system was realized and DVR function was built in. 

SYSTEMATIC FEATURES

1. Stability

- Stand alone type DVR system based on the embedded system electronic OS.
- Data are stored in OS and software flash memory, and Watchdog mounted.

2. Convenience

- Support a mouse, applied with GUI in which user’s convenience was focused.
- USB port and A/V output were disposed on the front to give convenience to user.
- Support various interfaces including mouse/jog/shuttle/remote control/front key.

3. Expansion Capabilities

- Basic 250GB HDD supplied.( additionally expanded to 3 HDDs in maximum.)
- Remote monitoring software of Inter-M DVRs (UCM).
- Support Explorer Viewer.

4. Technology 

- Realized GUI (Graphical User Interface) based on the Embedded System OS.

5. Performances 

- Diversified display outputs (VGA, Composite, video/audio on the front, and support 16 channel LOOP

OUT, DSR-1608: 16 channels, DSR-815: 8 channels)

- Support 4 channel audio input and 1 channel audio output 
- Support data backup and software upgrade.
- Monitor through the network./SW upgrade and flow IP.
- Timelaps/Interlock with an event/Record a post event 
- Set up a recording per camera, day of the week, or time 
- Outer sensor mounted to survey a movement. 

MAJOR FUNCTIONS

- It can monitor real time video images from 16 cameras.(DSR-1608: 16 channels, DSR-815: 8 channels)
- It offers various user control interfaces, including mouse, jog shuttle, and key pad + remote control.

PRECAUTIONS BEFORE GETTING STARTED

- Upon factory delivery, administrator’s password was not used but the password was input with “1234”.
- When setting it up for a first time, please confirm date and time, if not confirm to actual time, please reset.

Summary of Contents for DSR-1608





















































































Reviews:

No comments