manualshive.com logo in svg

Inter-m DSR-1608, Operation Manual

Share
Download
Inter-m DSR-1608 Operation Manual Download Page 40

DIGITAL VIDEO RECORDER

40

DSR-815/1608

UCM

UCM

1. Default Screen and Using the Functions

- UCM program is program allowing remote monitoring and remote control through networks.
- UCM program was designed to administrate DVRs in integral, whose functions not supported to other DVR

are restricted for some performances.

- Some functions of UCM program may be under change according to InterM’s situation.

<UCM Default Screen>

Function button may not be naturally executed at low line speed depending on the line speed of [UCM
Default Screen] network. Wait a minute until function will be executed.
Problem may occur that the screen stops or remains in a standby status for a long time when consecutively
using function button.

1. Monitoring Screen : Shows the camera image and camera connection information.

[ Camera Information ]

- Camera Name : Displays the configured camera name
- Recording & Event : [R]Do Record, [S]Sensor, [M]Motion

1

3

2

4

5

9

10

8

7

6

Summary of Contents for DSR-1608





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands