Inter-m DSR-1608 Operation Manual Download

Page: 16 / 84

DIGITAL VIDEO RECORDER

DSR-815/1608

1-1. Monitoring (Live) View : Shows the Camera image and camera connection information.

[ Camera Infomation ]

1) Camera Name : Displays the Configured Camera name.
2) Alarm status : Displays the Alarm status.
3) Record status : Displays the Record status.

(E: Emergence Mode, C: Continuous Mode, S: Sensor Mode, M: Motion Mode, A: Em
[Continuous Or Sensor Or Motion])

4) Index Information Window : Display the Hard disk information, current Date/current Time

※

Change a save capacity, date, or time indication: Click on the wheel button of the mouse or select

RETURN (ESC) Button of the front (remote control).

1-2. Submenu : The following menu will appear when mouse displace in the direction of the bottom of

the screen (date and time indication).

Camera Name

Alarm Status

Record Status

Summary of Contents for DSR-1608





















































































Search results

Summary of Contents for DSR-1608

Reviews:

Related manuals for DSR-1608

Brands by name

Popular brands

Inter-m DSR-1608, Operation Manual

Search results

Summary of Contents for DSR-1608

Reviews:

Related manuals for DSR-1608

Brands by name

Popular brands