Inter-m DSR-1608, Operation Manual

Page: 19 / 84

DIGITAL VIDEO RECORDER
19
DSR-815/1608
In each state, it runs as follows when you click on the button.
(2) Use the preset by utilizing the front key
In the preset state as you click on the numeral key of the front key each, the next numeral will appear
according to the numeral key you press. Range of the preset numerals are from 1 to 128. When a
numeral exceeding the range is input, it will be neglected. For example, you input 3, 4, 5 in sequence,
it will input until 34 but not accept 5. In order to input again, while pressing until 34, after pressing
one of
I ◀◀
, and
▶▶ I
and, ENTER and PTZ Key, you should press again a numeral key then. Of course,
when you press
I ◀◀
key, the current camera position will be saved in number 34 of the preset, and
when you press
▶▶ I
key, the reset position number 34 will be deleted, and when you press ENTER key,
the camera will displace the position of number 34 then. PTZ key will disappear the state indicator for
manipulating the front key. Other than, if you run Pan/Tilt or the mouse, it will make disappear it.
Therefore if you press
I ◀◀
and
▶▶ I
, it will execute one of the functions (Zoom, Focus, Speed, Preset)
pursuant to a current state then.
(3) Use others of the front key
- Pan Left/Pan Right: Each utilizes the directional
◀
and
▶
key
- Tilt Up/Tilt Down: Each utilizes the directional
▲
and
▼
key.
- Enter key: It the state indicator appears on the screen and the current state is of the preset, it make
the camera to move to the preset position of current number. Of course, it will make to move
provided that the preset number is already set up.
-
II
(Pause button): If the camera doest not move currently, as explained in the foregoing, when the
state indicator appears, it circulates Zoom->Focus->Speed->Preset, when Pan/Tilt/Zoom/Focus runs
currently the button acts as the stop button then. If you run Pan/Tilt/Zoom/Focus by utilizing the
front key, it will continue the running until you will press
II
button.
3) QUIT the P/T/Z mode.
Mouse : Click R-button of mouse.
Front key : “Return” key.
Key
I ◀◀
(–) Key
▶▶ I
(+) Key
Zoom Zoom-Out Zoom-In
Focus Focus-Far Focus-Near
Speed Decrease a speed of Pan/Tilt/Zoom/Focus Increase a speed of
Pan/Tilt/Zoom/Focus.
Preset Save a current position in the number Delete the preset information in
currently indicated.(It overwrites the currently indicated number.
saved in an existing number.)
Pan/Tilt Reducing a speed, continues to run Increasing a speed, continues to run
Operting Pan/Tilt being done currently. Pan/Tilt being done currently.