Inter-m DSR-1608 Operation Manual Download | Manualshive

Page: 36 / 84

background image

DIGITAL VIDEO RECORDER

36

DSR-815/1608

2-6-5. System Upgrade : Upgrade programs of the system.

On the configuration screen as shown in <Fig. 16>, click on “System Upgrade”.

[use of the front key and the remote control : Select “Menu” button, displace to corresponding menu with
the lateral (

◀▶

) button, and then select “Enter” button.]

1) Type : Set up a kind of upgrades.

(TFTP : Upgrade through the TFTP server, USB : Upgrade through the USB memory.)

2) TFTP IP ADDRESS : When upgrade through the TFTP server, set up a server address.
3) “Upgrade”: When click on “Upgrade” button, it executes the system upgrade.

(Firmware file name : DSR-1608 : DSR-1608r.bin, DSR-815 : DSR-815r.bin)
(1) Connect USB memory in which firmware was copied to USB TERMINAL.

(When upgrading TFTP, the firmware program must exist in upload folder of TFTP program.)

(2) Execute an upgrade by selecting “Upgrade”./Upgrade progression status window will be output.
(3) The upgrade has been completed by 100%.
(4) The system will be restarted.
(5) Message “Upgrade completed.”
(6) System Restart.... Will appear.

<Figure. 21>

* To confirm the system upgrade has been completed successfully.

Check up the firmware version of current system in the system information window as shown in
<Fig.17>.

* Firmware file to be upgraded must exist the root folder, the most high folder, of USB memory.

Ex.) If USB drive is “F”, “F:\DSR-1608r.bin” file must exist.

* When upgrading the system, if a power stoppage or power failure happen, it may damage files so

that cannot boot again.

* Be carefully execute an upgrade.
* If the system does not work on normally, please contact your distributor to examine your system.

«
...
34
35
36
37
38
...
»

Summary of Contents for DSR-1608





















































































Reviews:

No comments

Related manuals for DSR-1608

Brand: Datavideo Pages: 20

Brand: Fast Forward Video Pages: 12

Brand: Watchguard Pages: 88

Brand: COP Security Pages: 103

Brand: Huawei Pages: 248

EVD-04/050A1MJN

Brand: Euro Video Pages: 47

Brand: Euro Video Pages: 82

Brand: Divis Pages: 57

Brand: Reolink Pages: 21

Brand: HIKVISION Pages: 26

Brand: Datavideo Pages: 33

Brand: Datavideo Pages: 36

Brand: OwlTech Pages: 9

Brand: Vivotek Pages: 212

Brand: HyperVision Pages: 105

Brand: HIKVISION Pages: 12

Brand: IQ CCTV Pages: 81

Brand: Q-See Pages: 61

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands