Intenza 550 Series Elliptical Handbook: Maintenance: Self Diagnosis
Your Service Representative may need to check accumulated data about the past usage of
your Elliptical Trainer, test the function and check for error messages.
For these reasons, the Intenza 550 Series Elliptical is equipped with a service mode which has diagnostic reports that can assist with
troubleshooting. InCare™ Online functionis a service diagnostic process that can automatically send out detected error message to
Intenza customer service. For more information about self diagnosis, please contact your local dealer or refer to the service manual.
5.2 Self Diagnosis
When no longer useful, this equipment and/or its battery must be recycled, or disposed of,
according to your local, or national, recycling regulations.
To remove the battery, disassemble the bottom front cover by using a 4mm screwdriver, then disconnect the cables.
5.4 550ETXi Series: Recycling The Battery
Intenza 550
ETXi
is equipped with a generator and rechargeable battery to provide constant power.
Upon initial use (or after a prolonged storage period) the battery may require charging before achieving maximum capacity. There is
no need to charge the equipment’s battery for normal and frequent use. The console will display
CHARGE THE BATTERY
when the
battery voltage is low.
CHARGE BY GENERATOR
During normal daily use the power generated by your workout will keep the battery charged.
CHARGE BY EXTERNAL POWER
An optional power adaptor can be purchased and provides constant power to the equipment. A 19V/2.1A type of adaptor is required to
charge the battery. To purchase the optional power adaptor, check with your local dealer.
5.3 550ETXi Series: How to Charge The Battery
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
