Intense 2022 TAZER MX, Manual

Page: 7 / 44

S T E P 2
CHARGE
BATTERY
The battery is supplied in sleep mode. To wake it
up you need to connect it to your battery charger.
You can do this with the battery in your bike, but
for simplicity we suggest removing the battery and
placing directly on charge. It will take between 3-5
hours to fully charge the battery. See page 44 for
further battery charging information.
The battery will be locked in position. To remove
it you will need to use the key provided in the
accessory box following the steps below.
Remove the battery door by depressing the latch
rearward (A) , hinging the door and then pulling it out
and forward to remove from the tab insert.
Insert the battery key into the lock, and with your
other hand grab hold of the battery pull strap (B) .
Turn the key a quarter turn clockwise to release the
lock and then pull the battery strap until the battery
has moved past the lock mechanism.
Release the key while continuing to pull the battery
strap. As the battery pivots on the lower mount, lift the
battery out and away from the downtube of
the frame.
Remove the key and keep it in a safe place. You can
now charge the battery (C) , see page 44 for further
information. You can also replace the battery door.
Locate the tab on the door into the tab slot on the
bike frame and firmly press the top of the door until
the latch clicks shut.
A B
C
USE YOUR KEY
TO UNLOCK
THE BATTERY
13 12