Intense 2022 TAZER MX, Manual

Page: 27 / 44

PRESS AND HOLD Y
CHANGING THROUGH
THE MODES
You only get assistance from the motor when you start
to pedal. The motor ‘kicks in’ almost immediately with a
nice, smooth transition. On the Assist Switch controller
use the up and down arrows to move between the
different modes.
When you first turn the battery on, the display will
light up and show ‘OFF’ in the bottom left corner.
Use the up arrow (X) to move into ECO mode, press
it again for TRAIL, and again for BOOST. Pressing
the down arrow (Y) will take you back down through
those modes.
YOU WILL SEE THE MODE INDICATOR
CHANGE IN THE DISPLAY AS YOU TOGGLE UP
AND DOWN USING THE X AND Y ARROWS
ASSIST BUTTONS
DISPLAY PANEL DISPLAY PANEL (ZOOMED IN)
In a safe area, away from traffic, go through the
different modes as you pedal around, feeling the
different levels of assistance. As you change between
the modes you can keep pedaling, and don’t forget to
try the different modes in different gears to get the best
feel for your bike.
To use the WALK function you need to be off the bike,
with your feet off the pedals and the bike stationary.
Press and hold the down arrow (Y) until WALK
appears in the display. Release the down button, then
press and hold it down to activate the motor into WALK
mode. The level of assistance is only small (a max of
3.7mph), and it will depend on what gear you are in,
but it can be a useful helping hand in certain situations.
53 52