Intense 2022 TAZER MX, Manual

Page: 15 / 44

S T E P 1 1
ADJUST
SADDLE HEIGHT
S T E P 1 2
CHECK
TIRE PRESSURE
Set the height of your saddle (seat) with your dropper
seatpost in its fully extended position. (A) Using a
5mm Allen key loosen the seatpost clamp and adjust
the seatpost to the correct height. A good base
measurement is to stand next to your bike in your riding
shoes. Putting your hand against the top of your hip
bone (B) , the palm of your hand should be level with
the top of the saddle. Adjust as appropriate, then tighten
the seat clamp to 5Nm. Do not overtighten this bolt as it
may affect the performance of the seatpost. Note: You
may have to slightly readjust the saddle height once you
have set up your suspension correctly (STEPS 15-18).
(C) The ideal tire pressure setting is determined
by three factors: rider weight, type of terrain and
the desired balance of comfort and traction. The
pressures here are a suggested starting point and
can typically range +/- 5psi. Front: 24psi, Rear: 26psi.
It is always a good idea to inspect your tires for tears
and punctures before and after every ride.
A B
C D
E
S T E P 1 3
INSTALL BOTTLE CAGE
Your bike comes supplied with a water bottle cage.
Undo the two 3mm bolts (D) on the downtube of your
bike and fit the cage (E) . Tighten to 3Nm.
29 28