Intense 2022 TAZER MX, Manual

Page: 16 / 44

S T E P 1 4
INSTALL
BATTERY
Once your battery is fully charged (see page 47) you
need to reinstall it back into the bike.
Remove the battery door by depressing the latch
rearward, hinging the door and then pulling out and
forward to remove from the tab insert (A) .
Install the battery by inserting the rear of it first at
an angle of approximately 45º. Line up the two tabs
aligning the recessed portion on the bottom of the
battery (B) (circled red) to the tab on the base plate
located on the bike (circled yellow). With the bottom
of the battery hinged on the tab, push the top of the
battery into the battery opening with your thumb. This
should only require a small amount of gentle pressure
to click into place (C) . The battery is now locked in
position. If you want to remove the battery you will
need to use the key provided with the battery. See
STEP 1 for more information.
Replace the battery door by locating the tab on the
door into the tab slot on the bike frame and firmly
press the top of the door until the latch clicks shut. Do
not force the battery into the opening, as it can result
in damage to the battery or terminal.
A B
C
31 30