67
Edit Connection:
Parameter
Description
Enable Tunnel #
Select to enable this tunnel setting.
Connection Name
Enter a name for this connection.
Note:
Each of the
names needs to be unique
(
not duplicated
)
.
Local Site
Choose a type for the local site: single site or subnet.
Remote Site
Choose a type for the remote site: single site, subnet,
any address, any NAT Traversal address or L2TP
client. When you choose single site or subnet, you
need to specify the remote IP address.
Network Management
Choose the key exchange method: “IKE” or “Manual.”
Advanced
Click for the advanced setting screen for IKE (below).
Connection Type
Select “Initiator” and the tunnel will automatically
connect at the boot time. Select “Responder” and the