Installation Guide
This document contains an abbreviated version of the installation instructions for the
MWS Series Access Points Installation Guide. For the complete installation instructions
including the installation safety statements, see the product documentation on the Allied
Telesis web site at
www.alliedtelesis.com
.
Safety and Electromagnetic Emissions Certificates
For Safety and Electromagnetic Emissions certificates, refer to MWS Series Access
Point Installation Guide.
European Union Restriction of the Use of Certain Hazardous
Substances (RoHS) in Electrical and Electronic Equipment
This Allied Telesis RoHS-compliant product conforms to the European Union Restriction
of the Use of Certain Hazardous Substances (RoHS) in Electrical and Electronic
Equipment. Allied Telesis ensures RoHS conformance by requiring supplier Declarations
of Conformity, monitoring incoming materials, and maintaining manufacturing process
controls.
Europe - EU Declaration of Conformity
This device complies with Directive 2014/53/EU issued by the Commission of the
European Community. For more information, refer to MWS Series Access Point
Installation Guide.
Note
Note
Contact Allied Telesis for the EU conformity statement. To contact Allied Telesis,
visit our web site at
www.alliedtelesis.com
.
Redundancy Power Supply
The access point is equipped with one PoE+ capable LAN port and a DC power supply
jack. If the power supply unit on the access point fails or is not connected, the access
point draws its power through the PoE+ LAN port.
Note
Note
The AC adapter is
not
included in the shipping box. You must purchase the
AT-MWS0091 AC adapter separately.
Copyright
2017 Allied Telesis, Inc.
All rights reserved. No part of this publication may be reproduced without prior written
permission from Allied Telesis, Inc.
Installation Orientations
The access point can be installed on a table, ceiling, or wall.
The access point must be installed on the wall in the following orientations. In other
orientations, the access point
cannot
have a proper airflow.
LEDs
Components in the Shipping Box
Quick Installation Guide
AT-MWS600AP
Simultaneous Dual Band Access Point
613-002488 Rev. A
*613-002488 Rev A*
LED State
Description
Power
Orange
The access point is powered ON and operating
normally.
Off
The access point is
not
receiving power.
LAN
Blue
A valid link is established on the port.
Blinking Blue
Data is being transmitted/received.
Off
No link is established.
2.4GHz Wi-Fi
Blue
The 2.4GHz WiFi interface is enabled.
Blinking Blue
Data is being transmitted/received at the 2.4GHz
frequency band.
Off
The 2.4GHz Wi-Fi interface is disabled.
5GHz Wi-Fi
Green
The 5GHz WiFi interface is enabled.
Blinking
Green
Data is being transmitted/received at the 5 GHz
frequency band.
Off
The 5GHz Wi-Fi interface is disabled.
Nor supported.
Correct Table Installation
Correct Ceiling Installation
4351
4352
Name and Description
Component
Mounting
Base Kit
1 x Mounting Base
2 x Screw for the mounting base
(M2.6 9.8mm)
Rail Clip Kit
2 x Narrow rail clip
2 x Wide rail clip
2 x Spacer
2 x Short screw to attch a rail clip
without the spacer or attach to
the access point directly
2 x Long screw to attach a rail
clip with the spacer
4350
1
2
3
