manualshive.com logo in svg

Intellinet 524582, User Manual

Share
Download
Intellinet 524582 User Manual Download Page 25

25

work with some ISPs. Make sure this function can 
work properly when you use this function the first
time, especially if your ISP charges you by time used.

Click “OK” when you have finished the configuration above. You have completed
the configuration for the L2TP connection. You can start using the router now.

2.2.2.6  Telstra BigPond

Select Telstra BigPond if your ISP requires the Telstra BigPond protocol to
connect you to the Internet. Your ISP should provide all the information required
in this section. Telstra BigPond protocol is used by the ISP in Australia.

Parameter

Description

User Name

Enter the username provided by your ISP for the
Telstra BigPond connection.

Password

Enter the password provided by your ISP for the
Telstra BigPond connection.

User decide login server

Select if you want to assign the IP of Telstra

manually 

BigPond’s login server manually.

Login Server

The IP of the login server.

Click “OK” when you have finished the configuration above. You have completed
the configuration for the Telstra BigPond connection. You can start using the
router now.

Summary of Contents for 524582





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands