List of Functions by Operation Mode
*
: Direct setting is possible,
: Position data or parameter input is required, ×: The operation is not supported.
Note 1: This function is limited to the AC servo motor specification.
Note 2: The resolution when connecting a SCON controller to control a DDA motor is 0.001 degree (0.01 degree for positioner 5 mode only).
Note 3: The maximum output value in positioner 5 mode is 3,276.7mm (327.67 degrees for DDA motor).
To control the actuator in an operation range exceeding the maximum value, select a different operation mode.
Unlimited
×
×
(2 points)
×
×
(0.01mm)
128 points
×
(2 points)
(0.01mm)
128 points
(2 points)
(0.01mm)
128 points
(2 points)
×
128 points
×
×
×
(1 point)
×
×
×
16 points
×
(2 points)
×
(Note 3)
(0.1mm)
Direct numerical
control mode
Simple direct
mode
Positioner 1
mode
Positioner 2
mode
Positioner 3
mode
Positioner 5
mode
Number of
positioning points
Speed, acceleration/
deceleration settings
Different acceleration
and deceleration
settings
Home return motion
Positioning operation
JOG operation
Pitch feed
(Incremental)
Speed changes while
traveling
Position zone signal
output
Overload warning
output
Present position
reading
(Note 2)
(Resolution)
Push-motion operation
Pausing
Vibration control
(Note 1)
Zone signal output
Position data writing
27
