Intellian v240C, Installation And Operation Manual

Page: 111 / 177

111
Aptus
®
Spectrum Analyzer Main Menu
1) Graph
Displays measurement results. The display of a spectrum analyzer has the
frequency on the horizontal axis and the amplitude displayed on the vertical
axis.
2) Communication
Access the Spectrum Analyzer entering the ACU’s IP address and Port
number. Then click the Connect button. When Aptus has connected Ethernet,
Spectrum Analyzer will connect automatically.
The connection status is displayed on the right LEDs. The blue is in connection
status and the gray is disconnection status.
How to set up Spectrum Analyzer
1. Spectrum Analyzer Function
• Display that a spectrum analyzer measures an input Rx signal frequency within
the full frequency range and sets spectrum data view.
• The disconnect fault can be checked and solved through spectrum analyzer
results.
2. Access Spectrum Analyzer
On the Aptus PC, select “ Utility ( )
è
Spectrum ( )”on the toolbar
menus to display current spectrum graph and allow to set spectrum data view
options.
3. Spectrum Graph / Data View
After clicking the Spectrum menu button, the spectrum analyzer will be popped
up. To perform the Spectrum Analyzer function, check the following information.