Intellian v240C, Installation And Operation Manual

Page: 79 / 177

79
OPERATING THE ACU
Password
Antenna Menu
Set parameters Menu
Setup Mode
Set detect & tracking DVB
Setting Search Parameters
S E T U P M O D E ?
Y E S N O
1. Press LEFT arrow key to move cursor to YES and press OK key to enter SETUP Mode.
+ A N T E N N A + S A T E L L I T E
+ S Y S T E M + I N S T A L L A T I O N
2. Press OK key to enter ANTENNA MENU.
+ M A N U A L S E A R C H + S E T P O L A N G L E
+ S E A R C H P A R A M + S E T P A R A M E T E R S
3. Press arrow keys to move cursor to SET PARAMETERS Menu and press OK key to enter it.
E N T E R P A S S W O R D
- - - -
4. Press 4 digit password to enter SET PARAMETERS MENU (1590).
Setup parameters is only required after installation or repairs of your antenna system.
These parameters should only be changed by an authorized service technician.
Improper setting of these parameters will render your system inoperable.
D E T E C T D V B T R A C K I N G D V B
0 4 0 0 2 0
5. Set DETECT DVB and TRACKING DVB when DVB Menu of TRACKING SIGNAL is chosen
to be used (Range: 1-200).
DETECT DVB is to set the satellite signal detection level and TRACKING DVB is to set the
satellite signal tracking level.
Press LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press UP and DOWN arrow keys to increase and decrease the selected character.
Or press NUMBER keys to set the desired value directly. Press OK key to set the parameter.
Press BACK key to select the parameter you wish to edit and press BACK key again to save
or abort and return to the main display.