Intellian v240C, Installation And Operation Manual

Page: 91 / 177

91
OPERATING THE ACU
Set LNB local frequency
Set polarity
Sat NBD tracking
frequency
Set DVB tracking
frequency
S E L E C T L O C A L T R A C K S I G N A L
0 5 1 5 0 M H z N B D
6. SELECT LOCAL * to set LNB local oscillator frequency and TRACKING SIGNAL *.
The selectable LNB frequencies are depended on the installed LNB type.
Press LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press UP and DOWN arrow keys to increase or decrease the value.
Press OK key to set the parameter.
R X P O L T X P O L
V E R T . H O R I .
7. Set RX POL and TX POL
To select the polarity for both RX (receive ) and TX (transmit ) pol.
Press UP and DOWN arrow keys to select VERTICAL or HORIZONTAL.
Press OK key to set the parameter.
D V B F R E Q . S Y M B O L N I D
0 0 0 0 0 M H z 0 0 0 0 0 K S p s 0 X 0 0 0 0
8. Set DVB FREQUENCY, SYMBOL RATE and NID when DVB MENU of TRACKING
SIGNAL is chosen to be used.
45,000 is the maximum allowed symbol rate value. NID (network ID) range is from 0 x 0000
to 0 x FFFF (hexadecimal digit).
Press LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press UP and DOWN arrow keys to increase or decrease the value.
Or press NUMBER keys to set the desired value directly.
Press OK key to set the parameter.
N B D F R E Q . B A N D W I D T H
0 0 0 0 . 0 0 0 M H z 0 0 0 0 0 K H z
9. Set NBD IF FREQUENCY and detection BANDWIDTH when NBD (Narrow band detection)
MENU of TRACKING SIGNAL is chosen to be used.
Press LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press UP and DOWN arrow keys to increase or decrease the value.
Or press NUMBER keys to set the desired value directly. Press OK key to set the parameter.
TRACKING SIGNAL *
•
NBD
•
DVB