manualshive.com logo in svg

Intel SE7505VB2, Specification

Share
Download
Intel SE7505VB2 Specification Download Page 94

Absolute Maximum Ratings 

Intel® Server Board SE7505VB2 

 

11.  Absolute Maximum Ratings 

Operating the board at conditions beyond those shown in the following table may cause 
permanent damage to the system. The table is provided for stress testing purposes only. 
Exposure to absolute maximum rating conditions for extended periods may affect system 
reliability. 

Table 69. Absolute Maximum Ratings 

Operating Temperature  

5 

°

C to 50 

°

C 

1

 

Storage Temperature 

-55 

°

C to +150 

°

C 

Voltage on any signal with respect to ground 

-0.3 V to Vdd + 0.3V 

2

 

3.3 V Supply Voltage with Respect to ground 

-0.3 V to 3.63 V 

5 V Supply Voltage with Respect to ground 

-0.3 V to 5.5 V 

Notes: 

1.  Chassis design must provide proper airflow to avoid exceeding the processor maximum case 

temperature. 

2.  VDD means supply voltage for the device 

 

11.1  Mean Time Between Failures (MTBF) Test Results 

This section provides results of MTBF testing done by a 3

rd

 party testing facility.  MTBF is a 

standard measure for the reliability and performance of the board under extreme working 
conditions.  For the SE7505VB2 server board, MTBF was measured at 108,000 hours at 55 
degrees Centigrade. 
 

  

Revision 

1.2 

Intel part number C32194-002 

94

Summary of Contents for SE7505VB2













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands