Intel SE7505VB2 Specification Download | Manualshive

Page: 101 / 108

background image

Intel® Server Board SE7505VB2

Product Regulatory Compliance

13.1.4

Other Product Mandatory Regulations to Consider due to new Emerging
International Requirements

Note:

The use of telecommunication devices such as modems and/or wireless devices, have

not been planned for with respect to these systems and/or board products. If there is any
change of plan to use such devices, then telecommunication type certifications will require
additional planning. If NEBS compliance is required for system level products, additional
certification planning and design will be required.

13.1.5 Important

Product

Regulation Requirements

All plastics used must be made of a UL recognized material, and have the appropriate
flame ratings mandated by IEC60 950

All plastics parts shall be manufactured by an UL approved fabricator and the parts shall
be marked with the appropriate UL traceability markings.

All plastic parts shall have not use brominated flame retardants or any other halogenated
retardants that are not accepted by environmental programs such as Blue Angels,
Nordic White Swan, Swedish TCO.

All plastic parts shall be marked with the ISO11469 requirements for recycling.

All wiring harnesses shall be sourced from a UL approved wiring harness manufacturer.

All Fans shall have the minimum certifications: UL and TUV or VDE

All external power connectors shall have current limiting devices that have UL and TUV
or VDE certifications and shall be suitable rated for the application where the device in
its application complies with IEC60 950.

All lithium batteries shall be UL recognized and have suitable reverse bias current
protection for the application it is used in.

All printed wiring boards shall be rated UL94V-0 and be sourced from a UL approved
printed wiring board manufacturer

All connectors shall be UL recognized and have a UL flame rating of UL94V-0

Product safety label must be printed on UL approved label stock and printer ribbon.
Alternatively labels can be purchased from a UL approved label manufacturer.

13.1.6

Product Regulatory Compliance Markings

This product is provided with the following Product Certification Markings.

cURus Recognition Mark

CE Mark

Russian GOST Mark

Australian C-Tick Mark

Korean RRL MIC Mark

Taiwan BSMI DOC Marking & BSMI EMC Warning

ICES-003 Marking

Revision 1.2

Intel part number C32194-002

101

«
...
99
100
101
102
103
...
»

Summary of Contents for SE7505VB2













































































































Reviews:

No comments

Related manuals for SE7505VB2

Univerge SV9300

Brand: NEC Pages: 47

Univerge SV9100

Brand: NEC Pages: 766

Brand: AIC Pages: 52

UniServer R4300 G5

Brand: H3C Pages: 16

Brand: IBM Pages: 100

Brand: TYAN Pages: 77

DocuColor 45087638

Brand: Xerox Pages: 28

Brand: TRENDnet Pages: 135

Brand: BITMAIN Pages: 15

Brand: ClearCube Pages: 5

G4-40G-100-384T

Brand: Viavi Pages: 12

Brand: AirLive Pages: 113

Brand: TAG Pages: 44

Brand: Mozaex Pages: 66

GuruPlug Server Plus

Brand: GlobalScale Pages: 10

Brand: QUANTA Pages: 177

Brand: Aimetis Pages: 16

Sun Fire X2270 M2

Brand: Oracle Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands