manualshive.com logo in svg

Intel SE7505VB2, Specification

Share
Download
Intel SE7505VB2 Specification Download Page 48

SE7505VB2 ACPI Implementation 

Intel® Server Board SE7505VB2 

 

7. SE7505VB2 

ACPI 

Implementation 

7.1 ACPI 

An ACPI-aware operating system generates an SMI to request that the system be switched into 
ACPI mode. The BIOS responds to enable ACPI mode. The system automatically returns to 
legacy mode upon hard reset or power-on reset.  

The SE7505VB2 platform supports S0, S1, S4, and S5 states. When the system is operating in 
ACPI mode, the OS retains control of the system and OS policy determines the entry methods 
and wake up sources for each sleep state  

Note:

 Sleep entry and wake up event capabilities are provided by the hardware but are enabled 

by the operating system.  

S0 Sleep State 

The S0 sleep state is when everything is on. This is the state that no sleep is 
enabled. 

S1 Sleep State 

The S1 sleep state is a low wake-up latency sleep state. In this state, no 
system context is lost (Processor or chipset). The system context is 
maintained by the hardware. 

S4 Sleep State 

The S4 Non-Volatile Sleep state (NVS) is a special global system state that 
allows system context to be saved and restored (relatively slowly) when 
power is lost to the baseboard. If the system has been commanded to enter 
the S4 sleep state, the operating system will write the system context to a 
non-volatile storage file and leave appropriate context markers.  

S5 Sleep State 

The S5 sleep state is similar to the S4 sleep state except the operating 
system does not save any context nor enable any devices to wake the 
system. The system is in the “soft” off state and requires a complete boot 
when awakened. 

7.1.1 

Front Panel Switches 

The baseboard supports two front panel buttons:  

 

Power button 

 

Reset button 

  

Revision 

1.2 

Intel part number C32194-002 

48

Summary of Contents for SE7505VB2













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands