Intel SC450NX - Server Platform - 0 MB RAM, Product Manual

Page: 43 / 200

43
Console Redirection Submenu
Table 19. Console Redirection Submenu
Feature Choices Description
COM Port Address
Disabled
3F8
2F8
3E8
When enabled, console redirection uses the I/O port specified.
When disabled, console redirection is completely disabled.
IRQ # None, 3, or 4 When console redirection is enabled, this displays the IRQ
assigned per the address chosen in the COM Port Address
field.
Baud Rate 9600
19.2k
38.4k
115.2k When console redirection is enabled, use the baud rate
specified.
When the Emergency Management Port (EMP) shares the COM
port as console redirection, the baud rate must be set to 19.2k
to match EMP baud rate, unless the autobaud feature is used.
Flow Control No flow control
CTS/RTS
XON/XOFF
CTS/RTS + CD None disallows flow control.
CTS/RTS is hardware flow control.
XON/XOFF is software flow control.
CTS/RTS +CD is hardware plus carrier-detect flow control.
Boot Menu
You can make the following selections on the Boot Menu itself.
Table 20. Boot Menu
Feature Choices Description
Floppy Check Disabled
Enabled If Enabled, system verifies diskette type on boot.
Disabled results in a faster boot.
Multi-boot Support Disabled
Enabled Enable this option only if the total number of hard
drives is less than eight.
Boot Device Priority N/A Enters submenu.
Hard Drive N/A Enters submenu.
Removable Devices N/A Enters submenu.
Maximum Number of I2O Drives 1
4 Selects the maximum number of I2O drives assigned
a DOS drive letter.
Message Timeout Multiplier 1, 2, 8, 10,
50, 100, 1000 All timeout values are multiplied by this number.