Intel SC450NX - Server Platform - 0 MB RAM, Product Manual

Page: 52 / 200

52
Security Add-in
In this window, you can set the User and Administrator passwords and security options.
To Set the User Password
1. Click <User Password>.
2. Enter the password in the first field.
3. Confirm the password by entering it again in the second field.
To Change or Clear the User Password
1. Click <User Password>.
2. Enter the old password in the first field.
3. Enter the new password in the second field (or leave blank to clear).
4. Confirm the password by entering it again in the second field (or leave blank to clear).
To Set the Administrator Password
1. Click <Administrator Password>.
2. Enter the password in the first field.
3. Confirm the password by entering it again in the second field.
To Change or Clear the Administrator Password
1. Click <Administrator Password>.
2. Enter the old password in the first field.
3. Enter the new password in the second field (or leave blank to clear).
4. Confirm the password by entering it again in the second field (or leave blank to clear).
Security Options
In this window, you can set the other security options:
•
Hot Key—sets a key sequence that puts the server into secure mode when the key is pressed.
•
Lock-Out Timer—sets an interval that puts the server into secure mode when no activity
occurs during the interval.
•
Secure Boot Mode—forces the server to boot directly into secure mode.
•
Video Blanking—turns off the video when the server is in secure mode.
•
Floppy Write—controls access to the diskette drive when the server is in secure mode.
•
Reset/Power Switch Locking—controls the power and reset buttons when the server is in
secure mode.
System Event Log (SEL) Viewer Add-in
Clicking on the SEL add-in task brings up the SEL viewer add-in, which allows users to:
•
Examine SEL records via the BMC in hex or verbose mode
•
Examine SEL records by sensor or event type in hex or verbose mode
•
Examine SEL records from a previously stored binary file in hex or verbose mode
•
Save SEL records to a file in either text or binary form
•
Clear SEL entries from the non-volatile storage area