Intel 848P Thermal Design Manual Download Page 2 | Manualshive

Page: 2 / 35

background image

R

2

Intel

®

848P Chipset Thermal Design Guide

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR
IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO
LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR
USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL
PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, life sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
The 82848P MCH may contain design defects or errors known as errata which may cause the product to deviate from published
specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Intel, Pentium and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States
and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2003, Intel Corporation

«
1
2
3
4
...
»

Summary of Contents for 848P




































Reviews:

No comments

Related manuals for 848P

Brand: Eaton Pages: 12

Brand: Hama Pages: 12

Brand: Hama Pages: 12

Brand: Hama Pages: 14

Brand: Hama Pages: 8

Brand: Rane Pages: 2

Brand: vacuubrand Pages: 12

Brand: Vacon Pages: 47

Brand: Vacon Pages: 40

Brand: Valco baby Pages: 24

Brand: Balboa Pages: 74

Brand: Cadac Pages: 4

Brand: Yealink Pages: 8

Brand: J+J Pages: 4

Brand: Val Controls Pages: 6

Brand: Sunnen Pages: 24

Brand: Rain Bird Pages: 48

Brand: Sullair Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands