Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - VOLUME 2 01-2011 Datasheet Download Page 162

Page: 162 / 290

Processor Configuration Registers

162

Datasheet, Volume 2

2.10.25 PM_CAPID6—Power Management Capabilities Register

B/D/F/Type:

0/6/0/PCI

Address Offset:

80–83h

Reset Value:

C8039001h

Access:

RO, RO-V

Size:

32 bits

Bit

Attr

Reset

Value

RST/

PWR

Description

31:27

19h

Uncore

PME Support (PMES)

This field indicates the power states in which this device may

indicate PME wake using PCI Express messaging. D0, D3hot, and

D3cold. This device is not required to do anything to support D3hot

and D3cold, it simply must report that those states are supported.

Refer to the

PCI Power Management 1.1 Specification

for encoding

explanation and other power management details.

Uncore

D2 Power State Support (D2PSS)

Hardwired to 0 to indicate that the D2 power management state is

NOT supported.

Uncore

D1 Power State Support (D1PSS)

Hardwired to 0 to indicate that the D1 power management state is

NOT supported.

24:22

000b

Uncore

Auxiliary Current (AUXC)

Hardwired to 0 to indicate that there are no 3.3Vaux auxiliary

current requirements.

Uncore

Device Specific Initialization (DSI)

Hardwired to 0 to indicate that special initialization of this device is

NOT required before generic class device driver is to use it.

Uncore

Auxiliary Power Source (APS)

Hardwired to 0.

Uncore

PME Clock (PMECLK)

Hardwired to 0 to indicate this device does NOT support PME#

generation.

18:16

011b

Uncore

PCI PM CAP Version (PCIPMCV)

Version – A value of 011b indicates that this function complies with

revision 1.2 of the PCI Power Management Interface Specification.

15:8

RO-V

90h

Uncore

Pointer to Next Capability (PNC)

This contains a pointer to the next item in the capabilities list. If

MSICH (CAPL[0] @ 7Fh) is 0, the next item in the capabilities list is

the Message Signaled Interrupts (MSI) capability at 90h. If MSICH

(CAPL[0] @ 7Fh) is 1, the next item in the capabilities list is the

PCI Express capability at A0h.

7:0

01h

Uncore

Capability ID (CID)

Value of 01h identifies this linked list item (capability structure) as

being for PCI Power Management registers.

Summary of Contents for 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - VOLUME 2 01-2011



































































































































































































































































































Search results

Summary of Contents for 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - VOLUME 2 01-2011

Reviews:

Related manuals for 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - VOLUME 2 01-2011

Brands by name

Popular brands

Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - VOLUME 2 01-2011, Datasheet

Search results

Summary of Contents for 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - VOLUME 2 01-2011

Reviews:

Related manuals for 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - VOLUME 2 01-2011

Brands by name

Popular brands