f.
settings
23
84. aMplifier suB (rear) channel settings
Gain: 90% (turn to max, then back off 1/10th turn)
Output: LOW (low-pass crossover)
Crossover: 65 Hz
Bass Boost: 0 [THIS MUST BE ZERO!!]
85. head unit settings
L/R Balance: Center
F/R Fade: Fade to the FRONT about 40% from centered. About
80% of your total volume should be coming from the fronts, the
rears should just provide enough “fill” that it doesn’t sound empty
behind you.
Bass: Flat
Treble: Flat
Aux Input Level (see below): 50%
86. aux input vOluMe
The volume setting for the AUX input on the headunit can be
accessed by pressing and holding the right side of the 4th button
from the right. The factory default is 2. We recommend a start-
ing setting of 4. Please refer to the MINI Manual for setting the
Aux level on NAV and MINI Connect equipped vehicles.
87. install prestOl cages fOr aMp cOver
Once you have finished the amp adjustments, you can install the
amplifier cover. The mounting screws for the amp cover thread
into the Prestol Cages. Insert a Prestol Cage into each of the four
square holes at the corners of the under seat area. Use a hammer
to tap the Prestol Cages flush.
88. install aMplifier cOver
Install the amplifier cover with the either the removed factory
screws or the included #10 x 1” black oxide screws.
refer tO the Mini cOOper
Owner’s Manual!
