Step 3: Playing Back
En-18
to "Chinese". Operate by confirming the display on the
main unit.
Volume
: The volume of this unit and the AirPlay-
enabled device are linked. Take care that the
volume doesn't become too loud when you adjust
the volume on the AirPlay-enabled device. You may
damage the unit or the speakers. Stop play on the
AirPlay-enabled device immediately if the volume
becomes too loud at any point.
4
AM/FM Radio
The Basic Manual explains the method using automatic
tuning. For manual tuning, see the Advanced Manual.
1. Press the Tuner button on the main unit several
times to select either "AM" or "FM".
2. Press Tuning Mode on the unit, so that the "AUTO"
indicator on the display lights.
3. Press Tuning
on the unit.
The automatic tuning to a radio station starts. Searching
stops when one is tuned. When tuned into a radio
station, the " TUNED " indicator on the display lights.
The "FM STEREO" indicator lights if the radio station is
an FM radio station.
Actual display varies depending on the country or region
TUNED
FM STEREO
AUTO
Registering a radio station
: You can register up to 40
of your favorite AM/FM radio stations.
1. Tune into the AM/FM radio station you want to
register.
2. Press Memory on the unit so that the preset number
on the display flashes.
3. Repeatedly press Preset
on the unit to select a
number between 1 and 40 while the preset number is
flashing (about 8 seconds).
4. Press Memory again on the main unit to register the
station.
When registered, the preset number stops flashing.
To select a preset radio station, press Preset
on
the main unit or CH +/- on the remote controller.
･
To delete a registered preset station, press the
Preset
button on the main unit, select the preset
number you want to delete, then while holding down the
Memory button, press the Tuning Mode button. When
deleted, the number on the display goes off.
AM/FM frequency step setting
It may be necessary for you to change the frequency
step to tune the radio in your area. Change the step
with the following procedure. Note that when this
setting is changed, all radio presets are deleted.
1 After pressing RCV on the remote controller,
press Setup.
2. Select "6. Hardware" with the cursor and press
Enter.
3. Select "Tuner" with the cursor and press Enter.
4. Select "AM/FM Frequency Step" (North American
models) or "AM Frequency Step" (Australian
models) with the cursor and select the frequency
step for your area.
5
Multi-zone
You can listen to audio in a room (called Zone 2 or Zone 3)
other than the one where this unit is located (called the
main room). You can also output video and audio to a TV in
the separate room (Zone 2) via HDMI.
■
Sources you can playback
･
External players (
Ú
1)
･
NET (
Ú
2)
･
AM/FM Radio
* 1 In Zone 2, you can play equipment connected to any of the HDMI
IN1 to IN5 jacks, DIGITAL IN COAXIAL/OPTICAL jacks, AUDIO
IN jacks, or INPUT BALANCE L/R jacks. Note that only analog or
2-channel PCM audio signals can be played and that some players
require audio output setting. Only players connected to the AUDIO
IN jacks or INPUT BALANCE L/R jacks by analog connection can be
played in Zone 3.
＊
2 DSD and Dolby TrueHD audio cannot be played in Zone 2/Zone 3.
Making Multi-zone Connection
There are the following two methods of connection.
Simultaneous playback in all zones is also possible.
a. Connecting a TV in a separate room
b. Connecting with an integrated amplifier or power
amplifier in a separate room
■
a. Connecting a TV in a separate room
You can play video and audio of the HDMI connected
player on the TV in a separate room. With an HDMI cable,
connect between the HDMI OUT SUB/ZONE 2 jack of the
unit and the HDMI IN jack of the TV in a separate room.
Main room
Zone 2
Settings are required
: Press RCV and then Setup
on the remote controller, select "1. Input/Output
Assign" - "TV Out" and set the "Zone 2 HDMI"
setting to "Use".
･
The information for a connected device can
be displayed on the TV screen in a separate
room. Press the Zone2 button on the remote
controller to select Zone 2 and press Display.
･
Adjust the volume on the TV in the separate
room.
