Reference Information
En-80
Reference Information
Linked Operation with CEC-compatible
Components
Link operation with a product conforming to the CEC of the
HDMI standard.
Note that linked operation is not always guaranteed with all
CEC devices.
Operation has been confirmed on the following devices (as of
February 2015).
TV (Random order):
●
Toshiba TV sets
●
Sharp TV sets
Players/Recorders (Random order):
●
Onkyo and Integra RIHD-compatible players
●
Toshiba players and recorders
●
Sharp players and recorders (only when used together with
Sharp TV sets)
Caution:
For linking functions to work properly, do not connect more
RIHD-compatible components than the quantities specified below,
to the HDMI jacks. Linking functions are not guaranteed when more
RIHD-compatible components than the below mentioned quantities
are connected. Furthermore, do not connect this unit to another AV
controller/AV amplifier via HDMI.
●
Blu-ray Disc/DVD players: up to 3.
●
Blu-ray Disc/DVD recorders: up to 3.
●
Cable TV tuner, terrestrial digital tuner, and satellite broadcasting
tuner: up to 4 units.
Checking whether the HDMI Linked Operation
Settings Are Enabled
1. Turn on the power of all connected components.
2. Turn off the power of the TV, and confirm that the power
of the connected components is turned off automatically
with the link operation.
3. Turn on the power of the Blu-ray Disc/DVD player/
recorder.
4. Start playback on the Blu-ray Disc/DVD player/recorder,
and verify the following:
●
This unit automatically turns on, and selects the input
to which the Blu-ray Disc/DVD player/recorder is
connected.
●
The TV automatically turns on, and selects the input
to which this unit is connected.
5. Following the operating instructions of the TV, select
“Use the TV speakers” from the menu screen of the TV,
and confirm that the audio is output from the speakers
of the TV, and not from the speakers connected to the
amplifier receiver.
6. Select “Use the speakers connected to this unit” from
the menu screen of the TV, and confirm that the audio is
output from the speakers connected to the amplifier, and
not from the TV speakers.
Caution
:
●
Even if you set to output audio from the TV speakers, audio will
be output from the speakers connected to the amplifier when
you adjust the volume or switch the input on this unit. To output
audio from the TV speakers, redo the corresponding operations
on the TV.
●
In case of an RIHD connection with RI audio control compatible
components, do not connect the RI cable at the same time.
●
On the TV, when you select anything other than the HDMI jack
to which this unit is connected, the input on this unit will be
switched to "TV".
●
This unit will automatically power on in conjunction when it
determines it to be necessary. Even if this unit is connected to
an RIHD compatible TV or player/recorder, it will not power on if
it is not necessary. It may not power on in conjunction when the
TV is set to output audio from the TV.
●
Linked system functions with this unit may not work depending
on the component model connected. In such cases, operate this
unit directly.
●
When the player/recorder cannot be operated with the remote
controller of this unit, the corresponding component may not be
programmed to support the remote controller operation of CEC.
Program the remote control code of the component maker to the
remote controller for using.
About HDMI
HDMI (High-Definition Multimedia Interface) is a digital
interface standard for connecting TVs, projectors, Blu-
ray Disc/DVD players, set-top boxes, and other video
components. Until now, several separate video and audio
cables have been required to connect AV components.
With HDMI, a single cable can carry control signals, digital
video and digital audio (2-channel PCM, multichannel
digital audio, and multichannel PCM).
The HDMI video stream (i.e., video signal) is compatible
with DVI (Digital Visual Interface) (*1), so TVs and displays
with a DVI input can be connected by using an HDMI-to-
DVI adapter cable. (This may not work with some TVs and
displays, resulting in no picture.)
This unit supports HDCP (High-bandwidth Digital Content
Protection) (*2), so it can display picture only on HDCP-
compatible components.
HDMI of the unit supports the following functions.
Audio Return Channel, 3D, x.v.Color, Deep Color, LipSync,
4K (Passthrough)
Audio Formats Supported by The Unit:
●
2-channel linear PCM (32 - 192 kHz, 16/20/24 bit)
●
Multichannel linear PCM (up to 7.1 ch, 32 - 192 kHz,
16/20/24 bit)
●
Bitstream (Dolby Atmos, Dolby Digital, Dolby Digital
Plus, Dolby TrueHD, DTS, DTS-HD High Resolution
Audio, DTS-HD Master Audio)
●
DSD
Your Blu-ray Disc/DVD player must also support HDMI
output of the above audio formats.
About Copyright Protection
:
The unit supports Revision 1.4 and Revision 2.2 (HDMI
OUT MAIN/SUB and HDMI IN1 to 5 only) of the HDCP
(High-bandwidth Digital Content Protection) (*2), a copy-
protection system for digital video signals. Other devices
connected to the unit must also support HDCP.
*1
DVI (Digital Visual Interface): The digital display interface standard set
by the DDWG (*3) in 1999.
