Step 1: Connections
En-12
Video upconversion function
Video signals input to the VIDEO IN jack or the
COMPONENT VIDEO IN jacks will be upconverted
to HDMI signals and then output from the HDMI
output jack.
AV Controller
＊
When you upconvert video signals input to the
COMPONENT VIDEO IN jacks and output them
from the HDMI OUT jack, set the output resolution of
the player to 480i or 576i. If the input has 480p/576p
or higher resolution, a message prompting you to
change the resolution setting will appear. If your
player does not support 480i or 576i output, use the
VIDEO IN jack.
＊
If multiple video signal inputs are put into one input
system, HDMI signal output is prioritized.
3
Other connections
AM/FM antenna connections
Connect the antennas to listen to AM/FM broadcast. When
listening to the broadcast for the first time, adjust the
antenna position and orientation to get the best reception.
AM loop
antenna
(supplied)
Indoor FM antenna
(supplied)
Fix with a tack on the
wall.
(North American
models)
(Australian models)
Assemble the AM loop antenna (supplied).
Network connection
You can enjoy Internet radio, DLNA and AirPlay by
connecting the unit to LAN. Connect the Ethernet cable to
the Ethernet port of the router.
Internet radio
Router
NAS
Headphones connection
Connect stereo headphones with a standard plug (1/4 inch
or
φ
6.3 mm) to the Phones jack on the front panel. Sound
from the speakers will be off while you are using the
headphones.
･
If you selected any other listening mode than Stereo,
Mono and Direct, connecting headphones will switch the
listening mode to Stereo.
Power cord
This model includes a removable power cord. Connect
the power cord to AC INLET of the unit and then connect
to the outlet. Always disconnect the outlet side first when
disconnecting the power cord. When the unit is turned on, a
large instantaneous current may flow affecting functionality
of the computer and other devices, so it is recommended to
use a separate outlet.
