
7
Most states have laws pertaining to motor vehicles equipped with a video display within the
driver’s field of vision, either directly or indirectly, unless the video display is used in conjunction
with a backup safety camera to monitor the blind spots around the vehicl
e. INTEC’s products are
specifically designed to enhance vehicle safety. Use of an INTEC display to view video in any
manner other than intended requires installation in accordance with your state laws.
Federal and most states and their jurisdictions have laws pertaining to listening to and / or
recording, either directly or indirectly, the conversations of others without their consent. There are
specific federal and state laws prohibiting surreptitious recording and monitoring of audio
conversations. These laws are taken very seriously by authorities and failure to abide by them may
result in severe consequences.
Please consider this carefully before installing the External
Microphone and always confirm that you are in full compliance with any applicable laws where you
operate.
Use of this INTEC product requires installation in full compliance with all applicable laws.
Do NOT let the Car Vision® System distract you from driving safely.
1.3
Warnings
Do NOT attempt to connect other electrical devices to the power wire harness of the Car Vision®
System as this can cause an over current situation which can lead to electrical shock or fire.
If at any time you see or smell smoke coming from the Car Vision® System, stop driving, exit the
vehicle and disconnect main power. Check the system and remove any damaged components
before you resume normal vehicle operation.
Do NOT attach the wiring to any moving parts, across sharp edges or close to heat sources as this
may cause shorting of the wires and may lead to a fire or electrical shock.
When installing the system, be sure to use only INTEC supplied brackets. The Car Vision®
camera must be insulated from the vehicle body. The supplied camera bracket provides the
required insulation. Failure to do so could result in a fire and lead to property damage or personal
injury.