70
(3) End Time
Select ‘End Time’. Then the ‘End Time’ menu below appears. After completing the selection of the
desired recording type and the Date / Hour / Minute, locate the cursor at SELECT on the
menu screen and press the
‘ENTER’ button on the monitor or the ‘OK’ button on the remote
control.
(4) Backup Condition
NOTE - Under the conditions below, Backup does not proceed;
- if no USB memory is connected to the port
- if the Start Time and/or End Time is not set
- if the End Time is set earlier than Start Time
- if the date of the Start Time and End Time are different
- if the required backup data space is larger than remaining space available on the connected USB
memory