21
change the view in the sequential mode of
“6-5-4-3-2-1-PIP” with each press. There are several
status lines informing camera title, date & time, SSD & mSD recording etc. on the display screen.
①
Camera Input Name
The programmed title of each channel is shown in this status line. The title can be programmed in
the menu (FUNCTION > SETUP > CAMERA > INPUT NAME) and the lettering color of the titles
are changed depending on each recording mode and playback mode as below;
- Continuous Recording mode: Orange text color
- Shock Event Recording mode: Yellow text color
- Emergency Event Recording mode: Blue text color
- Playback mode: White text color
- Live View mode (in case of mSD single mode or no storage mode): Green text color
②
Storage Device Status
The percentage used for recorded data for
storage devices “SSD & mSD” are shown in this status
line. After fully filled with recorded data, it will read
“100%” in the capacity of SSD and mSD as
appropriate, and any new recording data will overwrite previous data in the sequence of FIFO
(First In First Out). The messages below are shown in the storage device status line;
- SSD FAIL and/or mSD FAIL: if SSD and/or mSD are not installed properly or inoperative.
- REC FAIL: if SSD Case locking slide switch is not pushed up completely.
③
Date & Time
This status line shows the current date and time as set in menu programming on the monitor. If the
GPS Antenna / Receiver is connected; the indicated time is automatically synchronized with the
date & time of the GPS Receiver. Refer to (FUNCTION > SETUP > TIME > TIME SETTING) menu.
④
Speedometer
This status line shows speed of vehicle if the GPS Antenna/Receiver is connected to the monitor.
The user can change the indication units (MPH /KPH)
in the menu of “FUNCTION > SETUP >
SYSTEM > SPEEDOMETER).