45
- Locate the cursor at the appropriate channel row in the VIDEO and/or CYCLE TIME (S) columns
using the
‘Screen (Up)’, ‘Channel (Down)’, ‘Volume Down (Left)’, Volume Up (Right)’ buttons on
the monitor or the Cursor Control (Direction) buttons on the remote control.
- Select the desired status of the camera channel and/or the cycle time by pressing
the ‘Enter’
button on the monitor or the
button on the remote control. Press the
‘Enter’ button
repeatedly until the desired camera channel status and/or cycle time is selected.
- Inactivated channels (OFF) are not recorded to the SSD or mSD and are depicted as
“DISABLED” (see below) on the monitor screen if selected.